PP dust-free shearing machine instructions:

With the upgrading and development of the overall technological level of the electronics industry, and the continuous improvement in technical requirements in all aspects, some manufacturers for high-end multi-layer circuit boards have put forward new requirements on prepreg products, and no dust or edge fracture on prepreg surface is allowed.

During the shearing process of a conventional PP shearing machine, due to the characteristics of the prepreg, the resin in the prepreg will be crushed, generating dust due to the impact of the shearing machine and the extrusion of the cutter during shearing, and the glass fibers in the prepreg will be broken into staple fibers. Due to the electrostatic interaction, a lot of dust and glass fibers stick to the edge of the prepreg and then to the entire surface of the cut prepreg, and the cutting edge has looseness and whitening due to fracture.

The PP dust-free shearing machine produced by Shanghai Baisheng, performs dust-free slitting and crosscutting, and performs edge sealing treatment through the optimized technology, on the basis of completely removing the original dust from the PP sheet surface. The product cut by the PP dust-free shearing machine has no dust on the surface, with smooth edges, without affecting the chemical and physical properties of the original PP sheet.

At present, various shearing systems on the market are mostly used at the low end of PCB and CCL, and they are simple or low in automation, with a low percent of pass, high cost and low efficiency. Combining the industry prospects and the requirements of high-end product enterprises, our company has independently researched and developed PP automatic dust-free shearing, stripping and edge sealing equipment, which has solved the problems of dust treatment after PP shearing and dust falling during overlapping, improved the product quality and efficiency, reduced the number of defective and waste products, and also reduced more than half of human resources, reducing costs and consumption. At present, it is the preferred equipment production line for PCB and CCL product enterprises.

Technical parameters:

Feature:

1. There should be no dust on surface of product after shearing, and the edges should be smooth;

2. Completely remove the original dust and impurities from the PP sheet surface;

3. It can be used online with the gluing machine, and the dust-free shearing speed can reach 25M/min;

4. For rolled PP slitting shear, the shearing speed is 5-20M/min, which is adjustable;

5. Continuous fabric joining production can be implemented for rolled PP, which reduces the waste of PP sheets;

6. The system automation degree is high, integrating dedusting, slitting shear and edge sealing;

7. It will not affect the chemical and physical properties of the original PP sheet;

According to user needs, various non-standard special types of fine filters are customized to meet different process requirements.

PP dust-free shearing machine instructions:

With the upgrading and development of the overall technological level of the electronics industry, and the continuous improvement in technical requirements in all aspects, some manufacturers for high-end multi-layer circuit boards have put forward new requirements on prepreg products, and no dust or edge fracture on prepreg surface is allowed.

During the shearing process of a conventional PP shearing machine, due to the characteristics of the prepreg, the resin in the prepreg will be crushed, generating dust due to the impact of the shearing machine and the extrusion of the cutter during shearing, and the glass fibers in the prepreg will be broken into staple fibers. Due to the electrostatic interaction, a lot of dust and glass fibers stick to the edge of the prepreg and then to the entire surface of the cut prepreg, and the cutting edge has looseness and whitening due to fracture.

The PP dust-free shearing machine produced by Shanghai Baisheng, performs dust-free slitting and crosscutting, and performs edge sealing treatment through the optimized technology, on the basis of completely removing the original dust from the PP sheet surface. The product cut by the PP dust-free shearing machine has no dust on the surface, with smooth edges, without affecting the chemical and physical properties of the original PP sheet.

At present, various shearing systems on the market are mostly used at the low end of PCB and CCL, and they are simple or low in automation, with a low percent of pass, high cost and low efficiency. Combining the industry prospects and the requirements of high-end product enterprises, our company has independently researched and developed PP automatic dust-free shearing, stripping and edge sealing equipment, which has solved the problems of dust treatment after PP shearing and dust falling during overlapping, improved the product quality and efficiency, reduced the number of defective and waste products, and also reduced more than half of human resources, reducing costs and consumption. At present, it is the preferred equipment production line for PCB and CCL product enterprises.

Technical parameters:

Feature:

1. There should be no dust on surface of product after shearing, and the edges should be smooth;

2. Completely remove the original dust and impurities from the PP sheet surface;

3. It can be used online with the gluing machine, and the dust-free shearing speed can reach 25M/min;

4. For rolled PP slitting shear, the shearing speed is 5-20M/min, which is adjustable;

5. Continuous fabric joining production can be implemented for rolled PP, which reduces the waste of PP sheets;

6. The system automation degree is high, integrating dedusting, slitting shear and edge sealing;

7. It will not affect the chemical and physical properties of the original PP sheet;

According to user needs, various non-standard special types of fine filters are customized to meet different process requirements.